RHINO RC456 Manuale dell'Operatore Scaricare il pdf (Pagina 13)

SAFETY

RC456 02/12 Safety Section 1-9

SAFETY

Transporting Safety Instructions and Practices

On a fully-assembled unit, do not remove the Wing Retaining Strap until hoses are attached

to the tractor and the Wing Cylinders are filled with oil. Lower the Wings slowly and

carefully. Keep bystanders away during operations.

(STI-05)

Be particularly careful when transporting the Implement with the Tractor. Turn curves or go

up hills only at a low speed and using a gradual steering angle. Rear mounted implements

move the center of gravity to the rear and remove weight from the front wheels. Make

certain, by adding front ballast, that at least 20% of the tractor’s weight is on the front wheels

to prevent rearing up, loss of steering control or Tractor tip-over. Slow down on rough or

uneven surfaces to prevent loss of steering control which could result in property damage

or possible injury. Do not transport unless 3-Point lift lever is fully raised and in the latched

transport position. Dropping implement in transport can cause serious damage to the

tractor and/or Implement and possibly cause the operator or others to be injured or killed.

(S3PT-02)

Allow sufficient clearance for the Implement to swing outward while turning. Implements

carried behind the Tractor will swing outside the tire path when making turns. Contacting a

solid object while turning will cause equipment damage and possible injury.

(S3PT-20)

Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in

such a way as to be clearly visible and legible. When transporting the

Equipment use the Tractor flashing warning lights and follow all local

traffic regulations.

(SG-6)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 69 70

Nessun commento

RHINO RC456 Manuale dell'Operatore Pagina 13